Tips to repair broken memory card

Damage to the memory card can also be called corrupt memory. This happens because the damaged file system (rather than physical damage) characteristics, ie the memory is not detected, or detected but could not be opened.

Some factors that could cause damage to the memory card

- Error when removing or inserting the card into the memory slot memory that result in physical damage.
- Excessive heat (too often used)
- Memory cards are often transported to another device, such as the Micro SD card to the phone we used a digital camera
- The influence of strong magnetic field
- And so on.

Here we will try to fix it by formatting the memory card.

Using a card reader connected to PC

How, through the Format menu of Windows Explorer.

1. Remove memory card from phone, insert it into the memory card reader.
Note:
Do not arbitrarily remove the memory of the phone. Especially on the phone with hotswap memory slot like the N70, use the menu "Remove Memory" to remove the memory when the phone is on. For phones without the "Remove Memory", you should switch off the phone first.

2. Find a memory card drive (see the menu of Windows Explorer), for example on the drive (D, E, F, G, H or other). If the memory is read, click the right mouse button, and choose 'Format'.

3. Next comes the choice of format type (FAT, FAT32 and NTSC), make sure you select FAT file system format.

4. Click the "Format Now" and wait until the finish.
If the message 'error' and then the PC can not reformat yet, use another way which is the format through Command Line menu.

Format via the Command Line

1. On the PC, click Start -> Run, and type CMD.
Command window will appear at the DOS prompt mode.

2. Next type FORMAT h: / FS: FAT
(H = the drive where the memory card, if the memory card is located on drive g, then write g)

3. Wait until the finish.
If the problem persists on a memory card, please use another memory card reader. But if it was not able to be repaired again, forced to the memory card must be exchanged with the seller, if still under warranty or otherwise disposed of only

Format with Software

In addition to the above manner, the troubled memory card format can also be done by using special software in fact there are many software-software but I describe a software that is quite powerful. For example for MMC cards available software MMCmedic. I should explain that although it is possible to improve the memory card (memory card) you but there is no guarantee that the data stored in the memory card (memory card) can be returned, but we can save without having to buy new memory (memory card)